 |
DW-AH05
Dowell
DW-AH05
4x(16-50)mm2; 4x(50-120)mm2
weather and UV resistance Polymer& aluminum alloy
For anchoring and tightening insulated conductors
DW-AH05 PAT Tension Clamp For Main Line 4AN
The anchor clamp is designed to anchor insulated main line with 4 conductors to the Pole, or service lines with 2 or 4 conductors to the pole or wall. The clamp is composed of a body, wedges and removable and adjustable bail or pad.
One core Anchor clamps are design to supporting the neutural messenger, the wedge can be self adjusting. Pilot wires or street lighting conductor are led alongside the clamp. The self opening is featured by an integrate spring facilities for easily insert the conductor into the clamp. Clamp body made of weather and UV resistance Polymer or aluminum alloy body with polymer wedge core.Adjustable link made of hot dip galvanized steel(FA) or stainless steel(SS).
Iron braces are made of steel strap with surface galcanized.
Wedges are made of weather resistant and anti-UV material with high mechanical strength.
Equipped with bolts.
Strong springs between wedges facilitate the insertion of conductors.
No loose parts could fall off during installation.
| Item No. | Cross section(mm2) | Messenger DIA.(mm) | MBL(daN) |
| DW-AH05-1 | 4x(16-50) | 11-14 | 2000 |
| DW-AH05-2 | 4x(50-120) | 14-17 | 3500 |
PAT tension clamp are applicable to four-core self-supporting low voltage aerial cables. These clamps are used for anchoring and tightening insulated conductors.
DW-AH05 PAT Tension Clamp For Main Line 4AN
The anchor clamp is designed to anchor insulated main line with 4 conductors to the Pole, or service lines with 2 or 4 conductors to the pole or wall. The clamp is composed of a body, wedges and removable and adjustable bail or pad.
One core Anchor clamps are design to supporting the neutural messenger, the wedge can be self adjusting. Pilot wires or street lighting conductor are led alongside the clamp. The self opening is featured by an integrate spring facilities for easily insert the conductor into the clamp. Clamp body made of weather and UV resistance Polymer or aluminum alloy body with polymer wedge core.Adjustable link made of hot dip galvanized steel(FA) or stainless steel(SS).
Iron braces are made of steel strap with surface galcanized.
Wedges are made of weather resistant and anti-UV material with high mechanical strength.
Equipped with bolts.
Strong springs between wedges facilitate the insertion of conductors.
No loose parts could fall off during installation.
| Item No. | Cross section(mm2) | Messenger DIA.(mm) | MBL(daN) |
| DW-AH05-1 | 4x(16-50) | 11-14 | 2000 |
| DW-AH05-2 | 4x(50-120) | 14-17 | 3500 |
PAT tension clamp are applicable to four-core self-supporting low voltage aerial cables. These clamps are used for anchoring and tightening insulated conductors.
