 |
DW-SCS-S
Dowell
DW-SCS-S
customized
Galvanized steel wire / Aluminum clad steel wire
for OPGW/ADSS Cable
DW-SCS-S Single Layer Suspension Clamp Set for ADSS
Single Layer Helical Suspension Clamp Set for ADSS is mainly used for hanging and supporting optical cable on straight tower/pole, to transfer axial load and divert axial pressure and provide well protection for optical cable, it also protect ADSS from emergencies caused by too small bending radius or stress concentration. Grip strength of the Suspension Set is larger than 15%-20% of ADSS rated tensile strength; it is fatigue resistance and can serve as vibration reduction.
•Short Span Suspension Set for ADSS cable is mainly used for span length within 100m; Single layer Suspension Set is mainly used for span length between 100m and 200m.
•If Suspension Set for ADSS is adopted double layers helical rods designing, generally it is used for 200m span length ADSS installation.
•Double Suspension Sets for ADSS cable is mainly used for ADSS installation on pole/tower with large falling head, and span length is larger than 800 meters or line corner is more than 30° .
DW-SCS-S Single Layer Suspension Clamp Set for ADSS
Single Layer Helical Suspension Clamp Set for ADSS is mainly used for hanging and supporting optical cable on straight tower/pole, to transfer axial load and divert axial pressure and provide well protection for optical cable, it also protect ADSS from emergencies caused by too small bending radius or stress concentration. Grip strength of the Suspension Set is larger than 15%-20% of ADSS rated tensile strength; it is fatigue resistance and can serve as vibration reduction.
•Short Span Suspension Set for ADSS cable is mainly used for span length within 100m; Single layer Suspension Set is mainly used for span length between 100m and 200m.
•If Suspension Set for ADSS is adopted double layers helical rods designing, generally it is used for 200m span length ADSS installation.
•Double Suspension Sets for ADSS cable is mainly used for ADSS installation on pole/tower with large falling head, and span length is larger than 800 meters or line corner is more than 30° .
